Noch 7 Tage

Leeds Building Services - Install and Commission Bespoke Flue Systems

Auftraggeber
Veröffentlicht
13.11.2026
Angebotsfrist
26.11.2026
Leeds Building Services (LBS) is seeking to establish a contract for a flue/chimney specialist. The contractor will be required to survey, design, supply components, install and commission bespoke chimney/flue systems for combustion appliances (mainly natural gas but may on occasion include heating oil and wood pellet fuelled appliances).   Each installation will be unique to the individual site. The overall contract may include some maintenance and repair work to existing flue systems.   The key standard governing the design and installation of flues for industrial and commercial gas appliances in the UK is IGEM/UP/10 (Installation of flued gas appliances in industrial and commercial premises) IGEM/UP/10 covers the design of flues and exhausts for gas engines exceeding 70 kW net heat input and all gas turbines up to 20 MW.

Zeitplan

Veröffentlichung
13.11.26
Fragenfrist
20.11.26
Abgabefrist
26.11.26
Vertragsbeginn
08.12.26

Ausschreibung

Reichweite
EU-weit
Vergabeart
Offenes Verfahren
Geschätzter Wert
75.000 £
Erfüllungsort
Leeds, Deutschland
E-Mail
LBS.Tenders@leeds.gov.uk

Eignungs- & Bewertungskriterien

Eignungskriterien

  • A core directive of Gas Safe Technical Bulletin 163 is that any bespoke or specialist flue system designed to operate under positive pressure conditions (such as commercial CHP units, data centre generator exhausts, and modern condensing boiler cascades) must undergo a physical pressure test prior to commissioning to verify the physical integrity of the joints and ensure leakage stays within acceptable limits.   Provide a design compliant with BS EN 13384.  Commission system to BS EN 15287. To include a positive pressure test where the flue is P1 pressure or above. (This will be the case in the majority of projects). Leakage rates to be less than the maximum permissible listed in IGE UP/10. Provide pressure test result certificate.  Supply and fit flue notice plate, including the designation of flue as described by BS EN 1443.  Construction & Materials

    • •Flue materials must safely resist temperature, pressure, mechanical stress, and corrosion. Separate flues must be run for incompatible fuels. Twin Wall insulated flue pipework
    • •Condensation Management: Condensing flue components must be corrosion-resistant and positive-pressure sealed. They require a minimum 22mm drainage pipe and a continuous upward slope toward the terminal of at least 2.5°.

Welche davon erfüllen Sie?

KI prüft alle Kriterien gegen Ihr Unternehmensprofil

Kostenlos · Sofortige Analyse

Lose (1)

Vergabeunterlagen

Die Vergabeunterlagen zu dieser Ausschreibung sind noch nicht in BidFix hinterlegt.

Mit einem kostenlosen Konto verfolgt BidFix diese Vergabe für Sie: Die Unterlagen erscheinen in Ihrem Konto, sobald sie verfügbar sind, inklusive Kriterien-Analyse und Fristen-Überwachung.

Nie wieder passende Ausschreibungen verpassen

KI findet täglich passende Aufträge für Sie – basierend auf dieser Ausschreibung.

Vergabeunterlagen neuer Ausschreibungen direkt im Konto
KI-Analyse der Eignungskriterien
Ähnliche Ausschreibungen automatisch erhalten
Wettbewerbsanalyse und Markteinblicke
Kostenlos · Keine Kreditkarte

Vertraut von 2.000+ Unternehmen

JobRadRecareDigit 4 U

Nie wieder passende Ausschreibungen verpassen