Medite Europe DAC

MEDITE Europe DAC are looking for suitably qualified Fire suppression companies to install suppression systems in the following Motor Control Centre (MCC) rooms across the Medite plant. • Anner HV Sub-Station • Fire-Pump House MCC • Line1 post-press MCC Project Background Mandatory Insurance Requirement Medite electrical distribution network comprises 17 Motor Control Centre rooms, and the main HV Switch-room located at Anner Substation. (See MCC layout drawing in Appendix 3). A number of these MCCs and the main Switch-room are considered higher impact and risk, due to the criticality of the processes they support and the ageing condition of the installed switchgear and associated cooling systems. Overall Program Objectives The multi-year goal of this program is to ensure that all site MCC + HV switch-room comply with legislative requirements and industry best practice for extinguishing electrical fires automatically. It is proposed to install a similar Clean Agent gaseous suppression system with appropriate smoke detection in all MCC rooms, starting with those with critical switchgear. Program estimated to take ~4 years. The program scope includes: • Design of suppression system for each room considering:  Size and fabric of structure  Presence of a floor void(s) or not  Age + condition of switchgear (risk of overheating + fire)  Ability to seal room effectively *  Type of cooling + air-handling (AHU) in place  Characterization of pressure in room now – Positive or Negative **  Ability to locate pressurized cylinders nearby • All necessary civil, mechanical and electrical (pre)works to enable the chosen system(s) • Integration of each system’s controls into the existing plant fire alarm system, where applicable to deliver the project goals • Ensure compatibility of control system with existing ones (fire control panel) * for total flood systems ** most Medite MCCs are positive pressure to keep out dust As part of the 2026 program of works the following 3 electrical rooms are to be addressed: • Anner Sub-station switch-room • Fire Pumphouse MCC room • Line1 Press Outfeed MCC room Preferred route is to install an Inert Gas system with appropriate Smoke Detection system. Scope of Works • Evaluate Enclosure Integrity Test results (‘door-fan’ test report) • Determine existing baseline for cooling, air-handling + room pressure profile • Based on results of EIT report referenced in Appendix 3, recommend and execute remedial measures • Determine and design optimal suppression system • Design and specify all necessary smoke / heat detection systems • Fire seal room to appropriate fire-rate • Install fire detection system • Install suppression system • Link system to house alarm and test • Validate and certify finished system *** Please see the attached Tender Document for the full and Complete scope of Works ***

Medite requires the provision of services of a Mechanical Engineering Contractor for the installation of Free Issue Compressors and Blowers including associated stainless-steel pipework, Valves, Exhaust Ducting and Fire Dampers at their Medite facility. The works also require the removal and decommissioning of the existing Air Compressors + Aeration Blowers. Site Location: Medite , Redmondstown, Clonmel, Co. Tipperary. Install Period: It is envisaged that the works will Completed during the Line 1 Annual Shutdown in June 2026, the expected Shutdown duration will be 10 Days. Piping enabling works to be carried out prior to this annual shutdown. Due to the nature of works as set out in this Tender and other maintenance activities being carried out on site, these works have been deemed to be ‘’CONSTRUCTION WORK’’ as per the HSA’s Safety Health and Welfare at Work (Construction) Regulations 2013.The successful Bidder will operate as ‘’PSCS’’ + ‘’CONTRACTOR’’ during the Initial Stages of the Project and will revert to ‘’CONTRACTOR’’ during the Line 1 Annual Plant Shutdown. The Scope of Works will be split into two Lots; LOT 1 - Compressed Air System Upgrade 2026. Scope of Works will Include the following: 1. Supply, Delivery and Installation of New 304 Stainless Steel Pipe Header (Dn200) and Drops to Compressors and Dryers (Dn100+ 65), Inc. Support Bracketry, + Temporary Supports as required. 2. Removal of 2No. Existing Air Compressors and Relocation of an Existing Air Compressor. 3. Installation of 2No. FREE ISSUE Air Compressors. 4. Supply and Delivery of New Exhaust Duct to 3No. New Compressors 5. Removal Existing CA Pipe Header + Brackets. LOT 2 - Aeration Blower Upgrade 2026 Scope of Works will Include the following: 1. Supply, Delivery and Installation of New 316 Stainless Steel Pipe Header (Dn250/200) and to Aeration Blower, Inc. Support Bracketry, + Temporary Supports as required. 2. Removal of 2No. Existing Aeration Blowers and Pipework Required. 3. Installation of 2No. FREE ISSUE Aeration Blowers. *** Please see the Tender Document attached for the full and complete Scope of Works including Specifications and Drawings which may also be attached separately ****